|
|
Issue 0052 in split format
- Summary
- Add timeout to spec file
; Owner: Tim
; Reporter: Tim
; Status: closed
; Priority: medium
|
; Summary: Add timeout to spec file
; Owner: Tim
; Reporter: Tim
; Status: closed
; Priority: medium
|
|
|
= Description =
Right now, specifying a timeout is supported in the testplan entry
for a test invocation.
|
|
However, it would be nice to be able to specify a timeout on an individual spec.
The specs for LTP, in particular, take wildly varying times.
|
However, it would be nice to be able to specify a timeout on an individual spec.
The specs for LTP, in particular, take wildly varying times.
|
- quickhit should run in under 15 minutes
* selectionwithrt can take upwards of 3 hours
|
* quickhit should run in under 15 minutes
* selectionwithrt can take upwards of 3 hours
|
|
Currently, if you manually add LTP tests with different specs (not adding
it via ftc using a testplan), you have
to go into the job configuration and change the timeout manually. This is
obnoxious.
|
Currently, if you manually add LTP tests with different specs (not adding
it via ftc using a testplan), you have
to go into the job configuration and change the timeout manually. This is
obnoxious.
|
|
|
= Notes =
Put other free-form comments or notes here
|
- backlink
Fuego Issues List
|
; backlink: [[Fuego Issues List]]
|
|
|