This page documents the Fuego core scripts functions.

The following functions are available to test scripts.

FIXTHIS - core functions: should document which of the functions are internal, and which are intended for test script use

list of routines (by providing script) [edit section]

• check that a program is present on the target, and abort the test if it is missing * build
• internal - perform the 'build' phase of test execution * build_cleanup
• internal - * check_capability
• check to see if the target has the specified capability * cleanup
• clean up target after a test * calls test_cleanup, if present * cmd
• to be used externally - execute a command on the target * concurrent_check
• wait for other test to complete before proceeding * deploy
• internal - perform the 'deploy phase of test execution * dump_syslogs
• dump the syslogs for the target under test * fetch_results
• retrieve testlog and system logs for a test * also, call test_fetch_results, if present * fail_check_cases * firmware
• get the firmware name from the target * get
• to be used externally - get a file or files from the target * get_testlog * hd_test_mount_prepare * hd_test_clean_umount * is_abs_path
• check if a path is absolute (starts with /) or not * is_empty
• fail if an environment variable is empty * is_on_target
• check if a program or file is on the target board * is_on_target_path
• check if a program is in one of the directories in the PATH on the target board * kill_procs
• kill process on the target * log_compare
• to be used by scripts (specifically by test_processing) * log_this
• used to log output of operations performed on the host (as opposed to on the board) * pre_build
• internal * pre_deploy
• internal * pre_test
• internal * post_build
• internal * post_deploy
• internal * post_test
• internal * processing
• internal * put
• to be used externally - put a file or files on the target * report
• to be used externally - execute command and put stdout into log * report_append
• to be used externally - execute command and append stdout to log * report_devlog * report_live
• to be used externally - execute command capture stdout live to a log on the host * safe_cmd
• to be used externally * snapshot
• internal * syslog_cmp * target_cleanup * target_reboot
• reboot the target * target_setup_route_to_host * unpack - internal - used to unpack the test program source tarball

= list of routines (by providing script) =
from functions.sh
 * [[function_assert_has_program|assert_has_program]] - check that a program is present on the target, and abort the test if it is missing
 * [[function_build|build]] - internal - perform the 'build' phase of test execution
 * [[function_build_cleanup|build_cleanup]] - internal - 
 * [[function_check_capability|check_capability]] - check to see if the target has the specified capability
 * [[function_cleanup|cleanup]] - clean up target after a test
    * calls [[function_test_cleanup|test_cleanup]], if present
 * [[function_cmd|cmd]] - to be used externally - execute a command on the target
 * [[function_concurrent_check|concurrent_check]] - wait for other test to complete before proceeding
 * [[function_deploy|deploy]] - internal - perform the 'deploy phase of test execution
 * [[function_dump_syslogs|dump_syslogs]] - dump the syslogs for the target under test
 * [[function_fetch_results|fetch_results]] - retrieve testlog and system logs for a test
    * also, call [[function_test_fetch_results|test_fetch_results]], if present
 * [[function_fail_check_cases|fail_check_cases]]
 * [[function_firmware|firmware]] - get the firmware name from the target
 * [[function_get|get]] - to be used externally - get a file or files from the target
 * [[function_get_testlog|get_testlog]]
 * [[function_hd_test_mount_prepare|hd_test_mount_prepare]]
 * [[function_hd_test_clean_umount|hd_test_clean_umount]]
 * [[function_is_abs_path|is_abs_path]] - check if a path is absolute (starts with /) or not
 * [[function_is_empty|is_empty]] - fail if an environment variable is empty
 * [[function_is_on_target|is_on_target]] - check if a program or file is on the target board
 * [[function_is_on_target_path|is_on_target_path]] - check if a program is in one of the directories in the PATH on the target board
 * [[function_kill_procs|kill_procs]] - kill process on the target
 * [[function_log_compare|log_compare]] - to be used by scripts (specifically by test_processing)
 * [[function_log_this|log_this]] - used to log output of operations performed on the host (as opposed to on the board)
 * [[function_pre_build|pre_build]] - internal
 * [[function_pre_deploy|pre_deploy]] - internal
 * [[function_pre_test|pre_test]] - internal
 * [[function_post_build|post_build]] - internal
 * [[function_post_deploy|post_deploy]] - internal
 * [[function_post_test|post_test]] - internal
 * [[function_processing|processing]] - internal
 * [[function_put|put]] - to be used externally - put a file or files on the target
 * [[function_report|report]] - to be used externally - execute command and put stdout into log
 * [[function_report_append|report_append]] - to be used externally - execute command and append stdout to log
 * [[function_report_devlog|report_devlog]]
 * [[function_report_live|report_live]] - to be used externally - execute command capture stdout live to a log on the host
 * [[function_safe_cmd|safe_cmd]] - to be used externally
 * [[function_snapshot|snapshot]] - internal
 * [[function_syslog_cmp|syslog_cmp]]
 * [[function_target_cleanup|target_cleanup]]
 * [[function_target_reboot|target_reboot]] - reboot the target
 * [[function_target_setup_route_to_host|target_setup_route_to_host]]
 * [[function_unpack|unpack]] - internal - used to unpack the test program source tarball

• abort the current test, emitting a reason string to output * assert_define
• to be used externally - check that an environment variable is defined * run_python * dprint
• print a 'debug' message * vprint
• print a 'verbose' message * iprint
• print an 'info' message * wprint
• print a 'warning' message * eprint - print an 'error' message

from common.sh
 * [[function_abort_job|abort_job]] - abort the current test, emitting a reason string to output
 * [[function_assert_define|assert_define]] - to be used externally - check that an environment variable is defined
 * [[function_run_python|run_python]]
 * [[function_dprint|dprint]] - print a 'debug' message
 * [[function_vprint|vprint]] - print a 'verbose' message
 * [[function_iprint|iprint]] - print an 'info' message
 * [[function_wprint|wprint]] - print a 'warning' message
 * [[function_eprint|eprint]] - print an 'error' message

from reports.sh
 * [[function_check_create_logrun|check_create_logrun]]
 * [[function_check_create_functional_logrun|check_create_functional_logrun]]
 * [[function_set_testres_file|set_testres_file]]
 * [[function_gen_report|get_report]]

from overlays.sh
 * [[function_set_overlay_vars|set_overlay_vars]] - internal - process overlays and set variables for board, platform, test plan and test specs

FIXTHIS - need to document the ov_* functions as well, from the scripts in the engine/overlays/base directory.

From base-distrib.fuegoclass:
 * [[function_ov_get_firmware|ov_get_firmware]]
 * [[function_ov_rootfs_reboot|ov_rootfs_reboot]]
 * [[function_ov_rootfs_state|ov_rootfs_state]]
 * [[function_ov_logger|ov_logger]]
 * [[function_ov_rootfs_sync|ov_rootfs_sync]]
 * [[function_ov_rootfs_drop_caches|ov_rootfs_drop_caches]]
 * [[function_ov_rootfs_oom|ov_rootfs_oom]]
 * [[function_ov_rootfs_kill|ov_rootfs_kill]]
 * [[function_ov_rootfs_logread|ov_rootfs_logread]]

From base-board.fuegoclass:
 * [[function_ov_board_setup|ov_board_setup]]
 * [[function_ov_board_teardown|ov_board_teardown]]
 * [[function_ov_transport_connect|ov_transport_connect]]
 * [[function_ov_transport_disconnect|ov_transport_disconnect]]
 * [[function_ov_transport_get|ov_transport_get]]
 * [[function_ov_transport_put|ov_transport_put]]
 * [[function_ov_transport_cmd|ov_transport_cmd]]
 * [[function_ov_board_control_reboot|ov_board_control_reboot]]

From base-funcs.fuegoclass:
 * [[function_default_target_route_setup|default_target_route_setup]]

From fuego_test.sh (in alphabetical order):
 * [[function_test_build|test_build]]
 * [[function_test_deploy|test_deploy]]
 * [[function_test_fetch_results|test_fetch_results]]
 * [[function_test_pre_check|test_pre_check]]
 * [[function_test_processing|test_processing]]
 * [[function_test_run|test_run]]
 * [[function_test_snapshot|test_snapshot]]

NOTE: phases are: pre_check, build, deploy, run, fetch_results, post_test, processing

Here are some known problems:
 * references to /home/jenkins
 * reference to OF_ROOT (not used anywhere)
 * some functions have been removed during refactoring
   * bench_processing
 * some functions have been added
   * (need to scan functions.sh, common.sh, etc.)
 * need to add functions that have pages, but are not linked to here
   * (need to scan [[ArticleIndex]])
 * need to check on what replaced a function:
   * [[function_build_error|build_error]] - to be used externally - report an error and abort the test
     * was used 44 times in fuego 1.0
       * all but 4 were from "| && touch ../test_suite_ready || build_error ..."
     * still called by Functional.ft2demos/fuego_test.sh