{{TableOfContents}}
''NOTE: under construction''

= Overview =
To add your own board to Fuego, there are three main steps:
 * 1. create a test directory on the target
 * 2. create a board file (on the host)
 * 3. add your board as a node in the Jenkins interface

== Create test directory on target ==
First, log in to your target board, and create a directory where
tests can be run.  Usually, you do this as root, and a commonly
used directory for this is "/home/a".  To do this, 
do the following:

For target with network connectivity : 
{{{#!YellowBox
 $ ssh root@your_target
 <target>$ mkdir /home/a
 <target>$ exit
}}}

For target with Serial connectivity : 

Use minicom or any other serial terminal tool.
Login to the target by giving username and password.
Create the directory 'a' as below: 
{{{#!YellowBox
 <target>$ mkdir /home/a
}}}


== Create board file ==
Now, create your board file.
The board files reside in <fuego-source-dir>/fuego-ro/boards, and
each file has a filename with the name of the board, with the extension ".board".

The easiest way to create a board file is to copy an existing one,
and edit the variables to match those of your board.  The following
instructions are for a board called 'myboard', that has networking
access, an ssh daemon running on target, and the ARM architecture.

Do the following:
{{{#!YellowBox
 $ cd fuego-ro/boards
 $ cp template-dev.board myboard.board
 $ vi myboard.board
}}}

''Note: you can use your own editor in place of 'vi' ''

=== Set board parameters ===
A board file has parameters which define how Fuego interacts with your
board.  There are lots of different parameters, but the most important
to get started quickly (and the most commonly edited) are:

==== TRANSPORT parameters ====
Each board needs to specify how Fuego will communicate with it.
This is done by specifying a TRANSPORT, and a few variables associated
with that transport type.

 * TRANSPORT - this specifies the transport to use with the target
   * there are three transport types currently supported: 'ssh', 'serial', 'ttc'
   * Most boards will use the 'ssh' or 'serial' transport type
   * ex: TRANSPORT="ssh" 

Most targets require the following:
 * LOGIN - specifies the user account to use for Fuego operations
 * PASSWORD - specifies the password for that account (if any)

There are some parameters that are specific to individual transports.

For targets using ssh:
 * IPADDR
 * SSH_PORT

IPADDR is the network address of your board.  SSH_PORT is the port where
the ssh daemon is listening for connections.  By default this is 22, but
you should set this to whatever your target board uses.

For targets using serial:
 * SERIAL
 * BAUD
 * IO_TIME_SERIAL

SERIAL is serial port name used to access the target from the host.  This
is the name of the serial device node on the host (or in the container).
this is specified without the /dev/ prefix.  Some examples are:
 * ttyACM0
 * ttyACM1
 * ttyUSB0

BAUD is the baud-rate used for the serial communication, for eg. "115200".  

IO_TIME_SERIAL is the time required to catch the command's response from the target. This is specified as a decimal fraction of a second, and is usually
very short.  A time that usually works is "0.1" seconds.
 * ex: IO_TIME_SERIAL="0.1"

This value directly impacts the speed of operations over the serial port, so
it should be adjusted with caution.  However, if you find that some operations
are not working over the serial port, try increasing this value (in small increments - 0.15, 0.2, etc.)

''Note: In the case of TRANSPORT="serial", Please make sure that docker container and Fuego have sufficient permissions to access the specified serial port. You may need to modify docker-create-usb-privileged-container.sh prior to making your docker image, in order to make sure the container can access the ports.  Also, if check that the host filesystem permissions on the device node (e.g /dev/ttyACM0 allows access. From inside the container
you can try using the sersh or sercp commands directly, to test access to
the target.''

For targets using ttc:
 * TTC_TARGET

TTC_TARGET is the name of the target used with the 'ttc' command.


==== Other parameters ====
 * BOARD_TESTDIR
 * ARCHITECTURE
 * PLATFORM
 * DISTRIB

The BOARD_TESTDIR directory is an absolute path in the filesystem on the
target board where the Fuego tests are run.
Normally this is set to something like "/home/a", but you can set it to
anything.  The user you specify for LOGIN should have access rights to
this directory.

The ARCHITECTURE is a string describing the architecture used by toolchains to build the tests for the target.

The PLATFORM variable indicates the toolchain to use to build the tests
for the target.  If you are using an ARM target, set this to "qemu-armv7hf".
This is a default ARM toolchain installed in the docker container, and should
work for most ARM boards.

If you are not using ARM, or for some reason the pre-installed arm toolchains
don't work for the Linux distribution installed on your board, then 
you will need to install your own SDK or toolchain.  In this case, follow
the steps in [[Adding a toolchain]], then come back to this step and set
the PLATFORM variable to the name you used for that operation.

For other variables in the board file, see the section below.

The DISTRIB variable specifies attributes of the Linux distribution
running on the board, that are used by Fuego.  Currently, this is mainly 
used to tell Fuego what kind of system logger the operating system on
the board has.  Here are some options that are available:
 * base.dist - a "standard" distribution that implements syslogd-style system logging.  It should have the commands: logread, logger, and /var/log/messages
 * nologread.dist - a distribution that has no 'logread' command, but does have /var/log/messages
 * nosyslogd.dist - a distribution that does not have syslogd-style system logging.

If DISTRIB is not specified, Fuego will default to using "nosyslogd.dist".



== Add node to Jenkins interface ==
Finally, add the board in the Jenkins interface.

In the Jenkins interface, boards are referred to as "Nodes".


You can see a list of the boards that Fuego knows about using:
 * $ ftc list-boards
When you run this command, you should see the name of the board you just
created.

You can see the nodes that have already been installed in Jenkins with:
 * $ ftc list-nodes

To actually add the board as a node in jenkins, inside the docker container, run the following command at a shell prompt:
 * $ ftc add-nodes <board_name>


= Board-specific test variables =
The following other variables can also be defined in the board file:
 * MAX_REBOOT_RETRIES
 * FUEGO_TARGET_TMP

See [[Variables]] for the definition and usage of these variables.

== General Variables ==
== File System test variables (SATA, USB, MMC) ==
If running filesystem tests, you will want to declare the Linux device name
and mountpoint path, for the filesystems to be tested.  There are three
different device/mountpoint options available depending on the testplan you
select (SATA, USB, or MMC).  Your board may have all of these types of
storage available, or only one.

To prepare to run a test on a filesystem on a sata device, define the
SATA device and mountpoint variables for your board.

For example, if you had a SATA device with a mountable filesystem accessible
on device /dev/sdb1, and you have a directory on your target of /mnt/sata
that can be used to mount this device at, you could declare the following
variables in your board file.
 * SATA_DEV="/dev/sdb1"
 * SATA_MP="/mnt/sata"

You can define variables with similar names (USB_DEV and USB_MP, or MMC_DEV and MMC_MP) for USB-based filesystems or MMC-based filesystems.

== LTP test variables ==
LTP (the Linux Test Project) has a large number of tests, not all of which
may be expected to work correctly on your board.  Some of the LTP tests
depend on the kernel configuration or on aspects of your Linux distribution
or your configuration.

You can control whether the LTP posix test succeeds by indicating the
number of positive and negative results you expect for your board.
These numbers are indicated in test variables in the board file:
 * LTP_OPEN_POSIX_SUBTEST_COUNT_POS
 * LTP_OPEN_POSIX_SUBTEST_COUNT_NEG

You should run the LTP test yourself once, to see what your baseline values
should be, then set these to the correct values for your board (configuration
and setup).

Then, Fuego will report any deviation from your accepted numbers, for 
LTP tests on your board.