|
|
{{TableOfContents}}
|
|
This is an index of all the variables used by Fuego:
|
This is an index of all the variables used by Fuego:
|
|
|
{{{#!YellowBlock
FIXTHIS - I don't have all the fuego variables documented here yet
|
|
See also Core interfaces
}}}
|
See also [[Core interfaces]]
}}}
|
|
tools.sh based on PLATFORM
* AS: name of the assembler
* set by tools.sh based on PLATFORM
* commonly used during the build phase (in the function test_build)
|
= A =
* ARCHITECTURE: the processor architecture of the target board
* defined in the board file for a target
* used by toolchain and build scripts for building the tests
* ''NOTE: this appears to only be used by iozone.sh''
* sample: arm
* ARCH: architecture used by the toolchain
* sample: arm
* set by [[tools.sh]] based on PLATFORM
* AS: name of the assembler
* set by [[tools.sh]] based on PLATFORM
* commonly used during the build phase (in the function [[function_test_build|test_build]])
|
|
|
= B =
* BAUD : Baud rate to be used with the serialport
* defined in the board file for a target
* used by serial transport
* sample: "115200"
* BOARD_TESTDIR : directory on the target board where test data will be placed
* defined in the board file for a target
* sample: "/home/fuego"
|
|
tools.sh based on PLATFORM
* commonly used during the build phase (in the function test_build)
* sample: arm-linux-gnueabihf-gcc
* CONFIGURE_FLAGS: flags used with the 'configure' program
* set by tools.sh based on PLATFORM
* commonly used during the build phase (in the function test_build)
* CROSS_COMPILE: cross-compile prefix used for kernel builds
* set by tools.sh based on PLATFORM
* sample: arm-linux-gnueabihf-
* NOTE: this is often $PREFIX followed by a single dash
* CPP: name of the C pre-processor
* set by tools.sh based on PLATFORM
* CXX: name of the C++ compiler
* set by tools.sh based on PLATFORM
* CXXCPP: name of the C++ pre-processor
* set by tools.sh based on PLATFORM
|
= C =
* CC: name of the C compiler
* set by [[tools.sh]] based on PLATFORM
* commonly used during the build phase (in the function [[function_test_build|test_build]])
* sample: arm-linux-gnueabihf-gcc
* CONFIGURE_FLAGS: flags used with the 'configure' program
* set by [[tools.sh]] based on PLATFORM
* commonly used during the build phase (in the function [[function_test_build|test_build]])
* CROSS_COMPILE: cross-compile prefix used for kernel builds
* set by [[tools.sh]] based on PLATFORM
* sample: arm-linux-gnueabihf-
* NOTE: this is often $PREFIX followed by a single dash
* CPP: name of the C pre-processor
* set by [[tools.sh]] based on PLATFORM
* CXX: name of the C++ compiler
* set by [[tools.sh]] based on PLATFORM
* CXXCPP: name of the C++ pre-processor
* set by [[tools.sh]] based on PLATFORM
|
|
|
= F =
* FUEGO_ENGINE_PATH: root directory for fuego system (the "engine")
* sample: /home/jenkins
* FUEGO_HOME: home directory on the target that fuego uses for operations
* sample: /home/a
* FUEGO_LOG_PATH: root directory for test logs
* sample: /home/jenkins/logs
* FUEGO_PARSER_PATH: root directory for fuego parser system
* sample: /home/jenkins/scripts/parser
* FUEGO_SCRIPTS_PATH: root directory for fuego scripts
* sample: /home/jenkins/scripts
* FUEGO_TESTS_PATH: root directory for fuego tests directories
* sample: /home/jenkins/tests
|
|
|
= G =
* GEN_TESTRES_FILE: set to the value of TEST_RES, when a BATCH_TESTPLAN is in effect
|
|
|
= I =
* IO_TIME_SERIAL: Time required for echoing the whole command and response
* defined in the board file
* used by the transport functions
* sample: 0.1
* IPADDR: IP address of the target board
* defined in the board file
* used by the transport functions
* sample: 10.0.1.74
|
|
tools.sh based on PLATFORM
* sample: arm-linux-gnueabihf-ld
* LOGIN: login account name for the target
* defined in the board file for the target
* used by the transport functions
* the account on the target should have sufficient rights to run a variety of tests and perform a variety of operations on the target
* sample: root
|
= L =
* LD: name of the linker
* set by [[tools.sh]] based on PLATFORM
* sample: arm-linux-gnueabihf-ld
* LOGIN: login account name for the target
* defined in the board file for the target
* used by the transport functions
* the account on the target should have sufficient rights to run a variety of tests and perform a variety of operations on the target
* sample: root
|
|
|
= M =
* MMC_DEV: device filename for an MMC device on the target
* defined in the board file
* used by filesystem test specs
* sample: /dev/mmcblk0p2
* MMC_MP: mount point for a filesystem on an MMC device on the target
* defined in the board file
* used by filesystem test specs
* sample: /mnt/mmc
* MOUNT_BLOCKDEV: device filename for a block device on the target
* defined in a filesystem test spec
* e.g. in (bonnie, fio, ffsb, iozone, synctest, aiostress, dbench, tiobench).spec
* usually references either MMC_DEV, SATA_DEV or USB_DEV, depending on what the test spec indicates to test
* sample: /dev/sda1
* MOUNT_POINT: mount point for a filesystem to be tested on the target
* defined in a filesystem test spec
* e.g. in (bonnie, fio, ffsb, iozone, synctest, aiostress, dbench, tiobench).spec
* usually references either MMC_MP, SATA_MP, or USB_MP, depending on what the test spec indicates to test
* sample: /mnt/sata
|
|
|
= O =
* OF_ROOT: root of overlay system
* sample: /home/jenkins/overlays/
|
|
tools.sh based on PLATFORM
* sample: arm-linux-gnueabihf
* NOTE: see also CROSS_COMPILE
|
= P =
* PASSWORD: password used with to login to the target board
* defined in the board file for a target
* used by the transport functions
* it can be the empty string: ""
* sample: mypass
* PLATFORM: name of the target "platform" This is used to identify the toolchain used for building tests
* defined in the board file
* used in tools.sh
* sample: qemu-armv7hf
* PREFIX: toolchain prefix
* set by [[tools.sh]] based on PLATFORM
* sample: arm-linux-gnueabihf
* NOTE: see also CROSS_COMPILE
|
|
|
= R =
* REP_DIR: directory where reports are stored
* sample: /home/jenkins/logs/logruns/
* REP_GEN: report generator program
* sample: /home/jenkins/scripts/loggen/gentexml.py
* REP_LOGGEN: program used to generate report logs?
* sample: /home/jenkins/scripts/loggen/loggen.py
|
|
|
= S =
* SATA_DEV: device node filename for a SATA device on the target
* defined in the board file
* used by filesystem tests
* sample: /dev/sda1
* SATA_MP: mount point for a filesystem on a SATA device on the target
* used by filesystem tests
* sample: /mnt/sata
* SRV_IP: IP address of server machine (host machine where fuego runs)
* defined in base-board.fuegoclass
* obtained dynamically using the 'ip' command
* can be defined in a board file for a target, using an 'override' command
* used by networking tests (NetPIPE, iperf, netperf)
* sample: 10.0.1.1
* SSH_PORT: port to use for ssh connections on the target
* defined in the board file for the target
* the default port for sshd is 22
* sample: 22
* SERIAL: port to use for serial connections on the target
* defined in the board file for the target
* The device file name as detected in Docker container
* sample: ttyACM0
|
|
|
= T =
* TESTLOG: full path to log for a particular test
* sample: /home/jenkins/logs/Functional.bzip2/testlogs/bbb.2016-06-24_18-12-53.2.log
* TEST_RES: full path to JSON results file for a test
* sample: /home/jenkins/logs/Functional.bzip2/testlogs/bbb.2016-06-24_18-12-53.2.res.json
* sample contents:
* TESTDIR: name of the directory for a particular test
* this is just the directory name, not the full path (see $TEST_HOME)
* this is also used as the reference parse log prefix
* sample: Functional.bzip2
* TEST_HOME: full path to the root of the test directory
* sample: /home/jenkins/tests/Functional.bzip2
different platforms
* TRANSPORT: type of connection between the host system and the target system
* defined in the board file for the target
* possible values: ssh, serial, ttc
* others anticipated are: adb, lava
* used by the transport functions
* sample: ssh
* TTC_TARGET: target name used with 'ttc' command
* defined in the board file for the target
* used by the transport functions, for the 'ttc' transport only
* sample: beaglebone
|
|
|
= U =
* USB_DEV: device filename for an block device provided by a USB device on the target
* defined in the board file
* used by filesystem test specs
* sample: /dev/sdb1
* USB_MP: mount point for a filesystem on an USB device on the target
* defined in the board file
* used by filesystem test specs
* sample: /mnt/usb
|
|
|
= UNDOCUMENTED (YET) =
* TRIPLET
* LTP_OPEN_POSIX_SUBTEST_COUNT_POS
* defined in board file for a target
* LTP_OPEN_POSIX_SUBTEST_COUNT_NEG
* defined in board file for a target
* EXPAT_SUBTEST_COUNT_POS
* defined in board file for a target
* EXPAT_SUBTEST_COUNT_NEG
* defined in board file for a target
* OF_ROOT
* OF_CLASSDIR
* OF_DEFAULT_SPECDIR
* OF_OVFILES
* OF_CLASSDIR_ARGS
* OF_TESTPLAN_ARGS
* OF_SPECDIR_ARGS
* OF_OUTPUT_FILE
* OF_OUTPUT_FILE_ARGS
* OF_DISTRIB_FILE
* OF_OVGEN
* OF_BOARD_FILE
* BATCH_TESTPLAN
* OF_TESTPLAN
* OF_TESTPLAN_ARGS
* OF_OVFILES_ARGS
|