Contents: Intended Outline Installing Fuego DUT Setup How I'm doing it in Bird Farm issues encountered

This page describes how to test an LTS kernel with Fuego.

As of April, 2018, this page was under construction...

Intended Outline [edit section]

• Installing Fuego
• DUT (device under test) setup
• executing tests
  • comparing your baseline results to others
  • setting your own baseline (custom criteria.json)
• interpreting results
• reporting failures
• adding to the test pool
  • LTP
  • kselftest

Installing Fuego [edit section]

Eventually, I want this to be:

• curl https://bitbucket.org/fuegotest/fuego/fuego-install.sh
• ./fuego-install.sh
• # install and test docker jobs (optional, but recommended for first-time users)
• ./docker-test
  • ftc add-node docker
  • ftc add-jobs -b docker -p testplan_docker_check
  • ftc build-job docker.testplan_docker_check.batch
  • (wait for completion)
  • ftc gen-report

What it is now...

• ...

DUT Setup [edit section]

To test LTS, you need a machine or board capable of running an LTS version of the kernel. This may require some setup on your part.

There are two options:

• run LTS on your local host
• run LTS on a target board

How I'm doing it in Bird Farm [edit section]

• installed fuego
• added min1 board
• ftc add-job -b min1 -p testplan_lts
• manually created new job in Fuego Jenkins: min1.lts
  • execute shell command:

    mkdir -p /fuego-rw/buildzone/$NODE_NAME
    cd /fuego-rw/buildzone/$NODE_NAME
    ttc $NODE_NAME get_kernel -o linux
    cd linux
    ttc $NODE_NAME get_config
    ttc $NODE_NAME kbuild
    ttc $NODE_NAME kinstall
    sleep 40
    ftc build-job $NODE_NAME.tesplan_lts.batch

• # configure job to poll lts for new job (should be able to use get-lts -t)

issues encountered [edit section]

• get-lts not installed in docker container
• min1/config-4.13.0-38-generic not available in container
  • put in /fuego-ro/boards as min1-lts-4.14-config
  • this requires a change to ttc.conf
    • need to override ttc.conf min1 with a new get_config_cmd
    • can add with TTC_CONF=/fuego-rw/boards/min1-ttc.conf
      • contents: target=min1, get_config_cmd="""cp /fuego-ro/boards/min1-....config $KBUILD_OUTPUT/.config, etc.

• would be better to get the config from some Debian minnowboard config online